Advertisement
Operating
unit
1, After initializing unit, press the ON/OFF button on remote control to turn on air
conditioner.
2,Press "MODE" on remote control to select mode: AUTO, COOL, DRY, FAN, or
HEAT.
3, Press "+" or .... button to set temperature. (Temperature can't be adjusted
under auto mode).
4,Press "FAN" button to set fan speed: low, low medium, medium, medium high,
high, super, auto and quiet speed.
5, Press "SWING" button to select fan blowing angle.
Replace batteries
in remote control
• During operation, point the remote control signal sender at the receiving
window on indoor unit.
• The distance between signal sender and receiving window should be no
more than 26ft(8m), and there should be no obstacles between them.
• Signal may be interfered by a fluorescent lamp or wireless telephone;
remote control should be close to indoor unit during operation.
• Replace new batteries of the same model when replacement is required.
• When you don't use remote control for a long time, please remove the
batteries.
• If the display on remote control is fuzzy or there's no display, please replace
batteries.
-15-
Advertisement
