Advertisement
REMOTE CONTROL
FUNCTIONS
• T-ON button
"T-ON" button can set the time for timer on. After pressing this button, " G " icon
disappears and the word "ON" on remote controller blinks. Press "+" or "-"button
to adjust T-ON setting. After each pressing "+" or "-"button, T-ON setting will
increase or decrease lmin. Hold "+" or "-"button, 2s later, the time will change
quickly until reaching your required time. Press"T-ON"to confirm it. The word "ON"
will stop blinking. "G " icon resumes displaying.Cancel
TIMER ON: Under the
condition that T-ON is started up, press "T-ON" button to cancel it.
e T-OFF button
"T-OFF" button can set the time for timer off. After pressing this button, "G" icon
disappears and the word "OFF" on remote controller blinks. Press "+" or "-" button
to adjust T-OFF setting. After each pressing "+" or "-" button, T-OFF setting
will increase or decrease 1rain. Hold "+" or "-" button, 2s later, the time will change
until reaching your required time. Press"T-OFF"to confirm it. The word "ON'will
"OFF" will stop blinking. "G"
icon resumes displaying. Cancel T-OFF.Under the
condition that T-OFF is started up, press "T-OFF" button to cancel it.
Note:
• Under on and off status, you can set T-OFF or T-ON simultaneously.
• Before setting T-ON or T-OFF, please adjust the clock time.
o After starting up T-ON or T-OFF, set the constant circulating valid. After that,
air conditioner will be turned on or turned off according to setting time. ON/OFF
button has no effect on setting. If you don't need this function, please use remote
controller to cancel it.
Press this button to set clock time. "G"
icon on remote controller will blink.
Press "+" or "-" button within 5s to set clock time. Each pressing of "+" or "-"
button, clock time will increase or decrease 1 minute. Hold "+" or "-" button, 2s
later, time will change quickly. Release this button when reaching your required
time. Press "CLOCK"button
to confirm the time. " Q" icon stops blinking.
Note:
• Clock time adopts 24-hour mode.
• The interval between two operations can't exceeds 5s. Otherwise, remote
controller will quit setting status. Operation for TIMER ON/TIMER OFF is
the same.
-11-
Advertisement
