Din Radio Provision With Pocket - Metra Electronics 99-1005 Installation Instructions Manual

DIN RADIO WITH POCKET PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1 Mount the pocket to the back of the
radio housing using (2) of the screws
supplied with the kit. (Figure A)
2 Mount the rear support bracket to the
back of the pocket using the remaining
(2) screws supplied with the kit.
(Figure A)
• Spectra only skip to final assembly.
3 Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure B)
4 Slide the aftermarket radio into the
cage until it snaps into place. (Figure C)
Continue to final assembly.
99-1005 KIT ASSEMBL Y
3
A
B
C