Download Print this page

Metra Electronics 99-7952 Installation Instructions Manual

For 2005-2007 suzuki aerio

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS FOR PART 99-7952
APPLICATIONS
2005-2007 Suzuki Aerio
99-7952
KIT FEATURES
• DIN head unit provision
• ISO DIN head unit provision
KIT COMPONENTS
A) Radio Housing l B) ISO Brackets | C) Trim Plate
A
B
C
TOOLS REQUIRED:
Phillips Screwdriver I Small Flat Blade Screwdriver I Utility Knife
1-800-221-0932
www.metraonline.com
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION

Advertisement

loading

Summary of Contents for Metra Electronics 99-7952

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-7952 APPLICATIONS 2005-2007 Suzuki Aerio 99-7952 KIT FEATURES • DIN head unit provision • ISO DIN head unit provision KIT COMPONENTS A) Radio Housing l B) ISO Brackets | C) Trim Plate TOOLS REQUIRED: Phillips Screwdriver I Small Flat Blade Screwdriver I Utility Knife 1-800-221-0932 www.metraonline.com...
  • Page 2 99-7952 T ABLE OF CONTENTS Dash Disassembly ........1 Kit Assembly .
  • Page 3 99-7952 2005-2007 SUZUKI AERIO Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove the trim panels from both sides of radio/climate controls. (Figure A) Remove (4) Phillips screws holding radio to sub dash and remove radio.
  • Page 4 99-7952 DIN HEAD UNIT PROVISION Cut and remove the center bar in the DIN opening of the 99-7952 Radio Housing. Secure the 99-7952 radio housing to the factory radio trim panel using the factory hardware. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down.
  • Page 5 99-7952 ISO DIN HEAD UNIT PROVISION Cut and remove the center bar in the DIN opening of the 99-7952 Radio Housing. Secure the 99-7952 radio housing to the factory radio trim panel using the factory hardware. Mount the ISO Brackets to the head unit with the screws supplied with the unit.
  • Page 6 99-7952 FINAL ASSEMBL Y 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
  • Page 7 99-7952 NOTES...
  • Page 8 INST997952 1-800-221-0932 www.metraonline.com REV. 04/10/07 © COPYRIGHT 2004 METRA ELECTRONICS CORPORATION INST99-7952...