Setting Smtp-Ssl/Tls Communication; Setting For Wireless Lan Wpa-Enterprise (Eap-Tls) - Dell S2810dn User Manual

NOTE:
Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4 After restarting the printer, the certificate set as described above is used as the server certificate when executing
communication with HTTP/IPP-SSL/TLS.

Setting SMTP-SSL/TLS Communication

1 Select Print Server Settings from the left side of the page.
2 Click the Security tab.
3 Select SSL/TLS.
4 Select Enable from the SMTP-SSL/TLS Communication list.
5 Click Apply New Settings.
6 After restarting the printer, SMTP-SSL/TLS Communication is enabled.

Setting for Wireless LAN WPA-Enterprise (EAP-TLS)

NOTE:
To manage digital certificates, you must set up HTTPS communication. For details, see "Preparing to Manage
Certificates."
NOTE:
WPA-Enterprise is available only when infrastructure is selected as the network type.
NOTE:
Be sure to import the certificate with Internet Explorer
NOTE:
After importing a PKCS#12 format certificate, the secret key is not exported even if you execute exporting.
1 Import the certificate to be used with Wireless LAN (server or root certificate). For details, see "Importing a Digital
Certificate."
2 Set the digital certificate for wireless LAN (server or root certificate).
Launch Dell Printer Configuration Web Tool.
a
Select Print Server Settings.
b
Click the Security tab.
c
Select SSL/TLS.
d
Click Certificate Management to display the Certificate Management page.
e
Select Trusted Certificate Authorities within Category.
f
Select Wireless LAN (Server) from the Certificate Purpose list.
g
From Certificate Order, select how the certificates are sorted in Certificate List. This setting is not necessary
h
if you do not need to specify the order for the certificates.
Click Display the List to display the Certificate List page.
i
Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
j
Click Certificate Details to display the Certificate Details page.
k
Confirm the content, and click Use This Certificate at the upper-right corner.
l
3 Confirm whether the certificate is set correctly. For details, see "Confirming the Settings of a Digital Certificate."
4 Import the certificate to be used with Wireless LAN (client or client certificate). For details, see "Importing a
Digital Certificate."
5 Set the digital certificate for wireless LAN (client or client certificate).
Launch Dell Printer Configuration Web Tool.
a
Select Print Server Settings.
b
Click the Security tab.
c
232
Using Digital Certificates
®
.