Dell S2810dn User Manual page 108

Reports
Purpose:
To print various types of reports and lists.
Values:
Printer Settings
Panel Settings
PCL Fonts List
PCL Macros List
PS Fonts List
PDF Fonts List
Job History
Error History
Print Meter
Demo Page
*1
Stored Documents
*1
This item is available only when RAM Disk is enabled.
Printer Settings
The Printer Settings tab includes System Settings, Network Settings, USB Settings, PCL Settings, PS Settings,
PDF Settings, and Secure Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Power Saver Time - Deep Sleep
Power Saver Time - Power Off Timer
mm / inch
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Job Completed Tone
Fault Tone
108
Dell™ Printer Configuration Web Tool
Click Start to print the Printer Settings report.
Click Start to print the Panel Settings report.
Click Start to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
Click Start to print the PCL Macro List.
Click Start to print the PS Fonts List.
Click Start to print the PDF Fonts List.
Click Start to print the Job History report.
Click Start to print the Error History report.
Click Start to print the Print Meter report.
Click Start to print Demo Page.
Click Start to print the Stored Documents list.
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
*1
Sets the time taken by the printer to be turned off after it has entered Deep
Sleep mode.
Sets the measurement unit to be used on the LCD panel as either mm or
inches.
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Sets the volume of the tone that is emitted when a print job is complete, or
disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.