Installing Printer Drivers on Windows
Identifying Printer Driver Pre-install Status
Before installing the printer driver on your computer, check the IP address of your printer by performing one of the
procedures in "Verifying the IP Settings."
Changing the firewall settings before installing your printer
If you are running one of the following operating systems, you must change the firewall settings before installing the
Dell™ printer software:
®
•
Windows Vista
®
•
Windows
7
®
•
Windows
8
®
•
Windows
8.1
®
•
Windows Server
2008
®
•
Windows Server
2008 R2
®
•
Windows Server
2012
®
•
Windows Server
2012 R2
The following procedure uses Windows
Software and Documentation disc into your computer.
1 Insert the
2 Click Start Control Panel.
3 Select System and Security.
4 Click Allow a program through Windows Firewall.
5 Click Change settings Allow another program.
6 Check Browse.
7 Type D:\setup_assist.exe (where D is the drive letter of the optical drive) in the File name text box, and
then click Open.
8 Click Add, and then click OK.
Starting Dell Printer Easy Install
Software and Documentation disc provided with the printer into your computer. The Dell Printer Easy
1 Insert the
Install program launches automatically.
NOTE:
If the Dell Printer Easy Install program does not launch automatically, follow the procedure below.
®
Windows Server
2008 and Windows Server
Click start Run, enter
box, and then click OK.
®
For Windows Vista
Click Start All Programs Accessories Run, enter
the optical drive) in the Run dialog box, and then click OK.
®
7 as an example.
®
2008 R2
D:\setup_assist.exe
®
and Windows
7
®
(where D is the drive letter of the optical drive) in the Run dialog
D:\setup_assist.exe
Installing Printer Drivers on Windows
9
Computers
(where D is the drive letter of
®
Computers
67