Table of Contents
Advertisement
3. Click the AirPlay icon in iTunes and select this unit
from the list of devices displayed.
4. Playing iTunes music files.
･ If "6. Hardware"-"Power Management"-"Network
Standby" is set to "On" in the Setup menu, then once
AirPlay starts, this unit switches on automatically and
the "NET" input source can be selected. Even if this
setting is "Off", if the unit is already on then the "NET"
input source can be selected.
･ Information such as the name of the track is displayed
on the unit's display during AirPlay playback.
･ Due to the characteristics of AirPlay wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the AirPlay-enabled
device.
･ There may be some differences in how operations are
performed depending on the iOS or iTunes version.
･ OSD are not displayed when the OSD language is set
to "Chinese". Operate by confirming the display on the
main unit. (European, Australian and Asian models)
Volume: The volume of this unit and the AirPlay-
enabled device are linked. Take care that the
volume doesn't become too loud when you adjust
the volume on the AirPlay-enabled device. You may
damage the unit or the speakers. Stop play on the
AirPlay-enabled device immediately if the volume
becomes too loud at any point.
4
BLUETOOTH
®
function
You can wirelessly enjoy music files stored in a smartphone
or other BLUETOOTH enabled device. The coverage area
is 48 feet (15 meters).
･ Note that connection is not always guaranteed with all
BLUETOOTH enabled devices.
■ Pairing
Pairing is necessary when connecting the BLUETOOTH
enabled devices for the first time. Before starting the
En-18
procedure, learn how to enable the BLUETOOTH
setting function and to connect with other devices on the
BLUETOOTH enabled device.
1. Press BLUETOOTH on the remote controller.
The unit begins pairing and "Now Pairing..." is displayed.
2. While "Now Pairing..." is on the display, complete
connection on the BLUETOOTH enabled device in
the nearby area within about 2 minutes.
If the name of this unit is displayed on the BLUETOOTH
enabled device's display, select this unit. Paring will end
after a short time.
･ If a password is requested, enter "0000".
･ You can pair with another BLUETOOTH enabled
device by pressing and holding the BLUETOOTH
button while "Now Pairing..." is on the display. This
unit can store the data of up to eight paired devices.
■ Playing BLUETOOTH enabled devices
If the unit is on and the BLUETOOTH enabled device
is connected, the input will be automatically switched to
BLUETOOTH. Play music in this state.
･ It may take about a minute until connection is
established when the unit is on since the BLUETOOTH
function takes some time to start up.
･ If the volume setting on the BLUETOOTH enabled
device is low, the sound will not be output from this unit.
･ Due to the characteristics of BLUETOOTH wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the BLUETOOTH
enabled device.
･ OSD are not displayed when the OSD language is set
to "Chinese". Operate by confirming the display on the
main unit. (European, Australian and Asian models)
Step 3: Playing Back
5
AM/FM Radio
The Basic Manual explains the method using automatic
tuning. For manual tuning, see the Advanced Manual.
1. Press the TUN button on the main unit several times
to select either "AM" or "FM".
2. Press TUNING MODE on the unit, so that the
"AUTO" indicator on the display lights.
3. Press TUNING
on the unit.
The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
station, the " TUNED " indicator on the display lights.
The "FM STEREO" indicator lights if the radio station is
an FM radio station.
TUNED
Actual display varies depending on the country or region
Registering a radio station: You can register up to 40
of your favorite AM/FM radio stations.
1. Tune into the AM/FM radio station you want to
register.
2. Press MEMORY on the unit so that the preset
number on the display flashes.
3. Repeatedly press PRESET
a number between 1 and 40 while the preset number
is flashing (about 8 seconds).
4. Press MEMORY again on the main unit to register
the station.
When registered, the preset number stops flashing.
To select a preset radio station, press PRESET
on the main unit or CH +/- on the remote controller.
･ To delete a registered preset station, press the
PRESET
button on the main unit, select the preset
number you want to delete, then while holding down
the MEMORY button, press the TUNING MODE button.
When deleted, the number on the display goes off.
AUTO
FM STEREO
on the unit to select
Hide quick links:
Advertisement
Table of Contents
