Other Useful Functions - Onkyo TX-RZ900 Basic Manual

Center Spread: Adjust the width of the sound field of
the front channel when playing in the Dolby Surround
listening mode.
To spread the width of the sound field to the left and
right, set to "On". To concentrate sound in the center, set
to "Off".
･ Depending on the speaker settings, this becomes
"Off".
Dialog Control: You can increase the dialog portion of
the audio in 1 dB steps up to 6 dB so that you can make
dialog easier to hear over background noise.
･ This cannot be set for content other than DTS:X.
･ The effect may not be selectable with some content.
■ HDMI :
HDMI OUT: Select the HDMI OUT jack to be used for
output.
Control TV: Set whether to enable the CEC link
function for TVs connected through one of the HDMI
OUT MAIN or SUB jacks.
■ Information:
Audio: Displays the audio input source, format, number
of channels, sampling frequency, listening mode, and
number of output channels.
Video: Displays information such as the video input
source, resolution, color space, color depth, 3D
information, aspect ratio, and output.
Tuner: Displays information such as the band,
frequency, and preset number. This is displayed only
when "TUNER" is selected as the input source.
8

Other useful functions

To adjust the sound quality
It is possible to enhance or moderate the bass and treble
of front speakers. Press TONE on the main unit several
times to select the desired setting from "Bass", "Treble" and
"Phase Matching Bass", and turn the TONE dial to adjust.
･ This cannot be set if the listening mode is Pure Audio,
En-22
Direct, or THX.
"Bass": Allows you to enhance or moderate the bass.
"Treble": Allows you to enhance or moderate the treble.
"Phase Matching Bass": Allows you to keep the clear
midrange and effectively enhance the bass.
Checking the Input Format
Press DISPLAY on the remote controller several times to
switch the display of the main unit in order of:
Input source &
Listening mode
Signal format & Sampling
frequency (Audio)
Input signal resolution
(Video)
･ If "Dolby D 5.1" is displayed in Signal format, the
Dolby Digital 5.1 ch signals are being input. When
listening to AM/FM radio, the band, frequency and
preset number are displayed.
Playing Audio and Video from Separate Sources
It is possible to play audio and video from different sources.
For example, you can play audio from the CD player and
video from the BD/DVD player. In this case, press BD/DVD
on the remote controller and then CD. Then start playback
on the BD/DVD player and CD player. This function is
effective when an input with audio only has been selected
(CD, NET, BLUETOOTH, TUNER, and PHONO in the initial
setting). ( Ú )
＊ When NET or BLUETOOTH is selected, press either the NET or
BLUETOOTH button then press MODE on the remote controller.
Step 3: Playing Back