Quick Setup Menu - Onkyo TX-RZ900 Basic Manual

WHOLE HOUSE MODE: If you press WHOLE
HOUSE MODE while playback is being performed
in the main room, the WHOLE HOUSE MODE is
turned on, "Z2" and "Z3" on the display light at
the same time and the playback sources of all the
rooms are switched to the same source at once.
･ The sources that can be played in Zone 2 can
be played in all rooms.
･ This function cannot be used if headphones are
connected or audio is output from the speakers
of the TV.
7

Quick Setup menu

You can perform common settings on the television screen
while playing.
1. Press Q on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
Quick Setup
Listening Mode MOVIE/TV
Audio MUSIC
HDMI GAME
Information THX
2. Select the items with the cursors on the remote
controller and then press ENTER.
･ To return to the previous screen, press RETURN.
3. Select the content with the cursors of the remote
controller.
■ Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".
After selecting, press ENTER button to confirm.
･ It cannot be set when audio is played from the TV's
speakers.
■ Audio: You can perform various audio settings including
audio quality and speaker level adjustment.
･ You cannot select this item when audio is output from
the TV's speakers.
Bass, Treble: Adjust volume of the front speaker.
･ It cannot be set if the listening mode is Pure Audio,
Direct or THX.
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound. Thus smooth and
powerful bass sound can be obtained.
･ It cannot be set if the listening mode is Pure Audio,
Direct or THX.
Center Level, Subwoofer Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
･ Changes may not be possible depending on the
speaker settings.
･ This setting is not possible during MUTING or when
using headphones.
Speaker Layout: Select the speakers to prioritize when
back speakers and height speakers are connected at
BD/DVD
the same time.
･ Changes may not be possible depending on the
speaker settings.
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap. Different settings can
be set for each input selector.
･ It cannot be set if the listening mode is Pure Audio or
Direct.
AccuEQ Room Calibration: Enable or disable the
settings made by automatic speaker setting. If this is to
be enabled, then normally you should select "On (All
Ch)", and to disable just the front speakers you should
select "On (ex. L/R)". The setting can be separately set
to each input selector.
･ This setting cannot be selected if the automatic
speaker setting has not been performed.
･ It cannot be set if headphones are connected or the
listening mode is Pure Audio or Direct.
Step 3: Playing Back
Equalizer: Select "Preset1" to "Preset3" configured in
"2. Speaker" - "Equalizer Settings" in the Setup menu.
The same sound field setting is applied all ranges when
set to "Off".
･ It cannot be set if the listening mode is Pure Audio or
Direct.
Music Optimizer: Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input selector.
･ The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream
signals.
･ It cannot be set if the listening mode is Pure Audio or
Direct.
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect
only with Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, and DTS sources.
･ Turning the unit to standby mode will set the setting
to "Off". In case of Dolby TrueHD, the setting will be
set to "Auto".
･ The setting cannot be used in the following cases.
– If "3. Audio Adjust" - "Dolby" - "Loudness
Management" in the Setup menu is set to "Off"
when playing Dolby Digital Plus or Dolby TrueHD
– When the input signal is DTS and "Dialog
Control" is other than 0 dB
Re-EQ, Re-EQ(THX): Adjust the soundtrack that was
processed to enhance its treble, in order to make it
suitable for home theater.
･ This function can be used in the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24,
DTS-HD High Resolution Audio, DTS-HD Master
Audio, and DTS Express.
･ In Re-EQ(THX), the following listening modes can
be used: THX Cinema, THX Surround EX, and THX
Select2 Cinema.
En-21