Display - Onkyo TX-RZ900 Basic Manual

MUSIC OPTIMIZER button: Turns on/off the MUSIC
L
OPTIMIZER function that improves the quality of the
compressed audio.
HDMI OUT button: Allows you to select the HDMI jack
M
to output video signals.
DISPLAY button: Switches the information on the
N

display.

SETUP button: Used when making settings.
O
QUICK SETUP button: Displays the Quick Setup menu
P
that allows you to quickly access the frequently used
setting items including sound quality adjustment.
Cursor buttons, TUNING lj button, PRESET
Q
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with TUNING lj or
select the registered station with PRESET
RETURN button: Returns the display to the previous
R
state.
DIMMER button (North American models): Switches
S
the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
MEMORY button: Registers a radio station.
T
AUX INPUT HDMI jack: A HD camera or such other
U
device is connected.
SETUP MIC jack: The supplied speaker setup
V
microphone is connected.
TUNING MODE button: Switches the tuning mode.
W
WHOLE HOUSE MODE button: Enables the WHOLE
X
HOUSE MODE function to play the same source in all
the multi-zone connected rooms.
En-4
1
8
dc
Display
Speaker/Channel display: Displays the output channel
1
that corresponds to the selected listening mode.
dc .
Z2/ Z3: Lights when the output to Zone 2/ Zone 3 is set
2
to on.
Lights according to the type of input digital audio signals
3
and the listening mode.
Stays lit when Music Optimizer is enabled.
4
Lights when playing NET or USB.
5
"NET": Lights when "NET" input is selected and the unit
6
is connected to the network. It will flash if the connection
is not correct.
"USB": Lights when input is "NET" and USB is
connected and selected. It will flash if the connection is
not correct.
"HDMI": Lights when HDMI signals are input and the
HDMI input is selected.
"DIGITAL": Lights when digital signals are input and the
digital input is selected.
"MUTING": Flashes when muting is on.
"ANALOG": Lights when analog signals are input and
the analog input is selected or when HDMI and digital
signal inputs are not assigned.
"SLEEP": Lights when the sleep timer is set.
Lights in the following conditions.
7
"RDS" (European, Australian and Asian models):
Receiving RDS broadcasting.
"AUTO": Tuning mode is auto.
"TUNED": Receiving AM/FM radio.  flashes
while tuning is automatically performed.
"FM STEREO": Receiving FM stereo.
"Bi AMP": Using bi-amp.
8
2 3 4 5
9
6
F
Stays lit when headphones are connected.
9
Displays various information of the input signals.
F
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
Shows the volume level.
G
7
G