Rear Panel - Onkyo TX-RZ900 Basic Manual

1
K

Rear Panel

RI REMOTE CONTROL jack: An Onkyo product with RI
1
jack can be connected and synchronized with this unit.
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
2
signals are input.
RS232 port: Connected to the home control system.
3
( Ú )
USB port: A USB storage device is connected so that
4
music files stored in it can be played. Connect a USB
device with a USB cable to supply it with power.
ETHERNET port: Used for LAN connection
5
VIDEO IN/OUT jacks: Composite video input/output
6
jacks.
HDMI IN/OUT jacks: Digital video signals and audio
7
signals are transmitted between the unit and the
connected devices.
COMPONENT VIDEO IN/OUT jacks: Component video
8
input/output jacks.
2 3 4 5 6 7
L
TUNER AM/FM(75Ω) terminal: The supplied antennas
9
are connected.
12V TRIGGER OUT MAIN jack: Allows you to connect
F
a device with 12V trigger input jack to enable link
operation between the device and the unit. ( Ú )
IR IN jack: Connected to the multiroom remote control
G
kit. ( Ú )
Wireless antenna: Used for Wi-Fi connection or when
H
using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.
8 9 F G
M N
90°
180°
90°
180°
H I J
PRE/LINE OUT ZONE 2 jack, LINE OUT ZONE 3 jack:
I
Audio output jack connected to the power amplifier and
pre-main amplifier for multi-zone playback in a separate
room.
AC INLET: The supplied power cord is connected.
J
GND terminal: The ground wire of the turntable is
K
connected.
AUDIO IN jacks: Analog audio signals are input.
L
PRE OUT jacks: A power amplifier or subwoofer with
M
built-in amplifier is connected.
Speaker terminals: Speakers are connected. To use
N
the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
＊ Special devices or cable connections are necessary to use the 3, F
and G functions. Contact the specialized stores for more information.
En-5