Aiwa XR-EC10 Service Manual page 15

CD MECHANISM DISASSEMBLY INSTRUCTIONS AND RE-ASSEMBLY INSTRUCTION -8/14
QQ
3 7 63 1515 0
10.SWITCH4 (DISC2), SWITCH5 (DISC1)
1) Remove the COVER 2. (Refer to "1. COVER 2".)
2) Open the DRAWER. (Refer to "2. Open the DRAWER".)
3) Remove the ASS'Y CRG from the CHASSIS. (Refer to "4. Remove the ASS'Y CRG from CHASSIS.)
4) While holding the front side of the LIFTER in the right, remove the LIFTER in the right and remove the SPRING.
5) Open the top rear of the CHASSIS and remove the ASS'Y CLAMPER.
6) While pressing the portions fixing C.B. to the CHASSIS, rotate the C.B. clockwise and remove the C.B.
TE
L 13942296513
Note when installing SPRING to the LIFTER
Install the SPRING to the LIFTER as shown in the illustration.
www
.
http://www.xiaoyu163.com
LIFTER
Fig.10-a
SW4,5
Fig.10-c
LIFTER
SPRING
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Fig.10-b
Q Q
3 6 7 1 3 1 5
Fig.10-d
co
.
-15-
9 4 2 8
ASS'Y CLAMPER
0 5 8 2 9 9 4 2 8
m
9 9
9 9