Aiwa XR-EC10 Service Manual page 14

CD MECHANISM DISASSEMBLY INSTRUCTIONS AND RE-ASSEMBLY INSTRUCTION -7/14
QQ
3 7 63 1515 0
8. SWITCH6 (OPEN / CLOSE), SWITCH7 (FWD), SWITCH8 (RVS)
1) Remove the four screws fixing the C.B. in the bottom of the mechanism.
2) Remove soldering of the MOTOR terminal and remove the C. B.
3) You can replace the SWITCH in this state.
9. SWITCH2 (EXTRA), SWITCH3 (HOME)
1) Remove the COVER 2. (Refer to "1. COVER 2".)
2) Remove the DRAWER. (Refer to "2. Open the DRAWER" and "3. Remove the DRAWER from mechanism".)
3) Remove the screw of the DRAWER and remove the SPACER.
4) You can replace the SWITCH by releasing the HOOK at the two locations.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
SW7 FWD
SW8 RVS
Fig.8
SCREW
Fig.9
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
SW6 OPEN/CLOSE
SW2,3
Q Q
3 6 7 1 3 1 5
SPACER
co
.
-14-
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9