Aiwa XR-EC10 Service Manual page 12

CD MECHANISM DISASSEMBLY INSTRUCTIONS AND RE-ASSEMBLY INSTRUCTION -5/14
QQ
3 7 63 1515 0
5. Remove ASS'Y CRG from DRAWER
1) Remove COVER 2. (Refer to "1. COVER 2".)
2) Remove DRAWER. (Refer to "2. Open the DRAWER" and "3. Remove the DRAWER from mechanism".)
3) Rotate the BEVEL GEAR in the direction (counter-clockwise direction) of the arrow as shown.
The PINION ASS'Y rotates and the CRG moves.
* Because the BEVEL GEAR can be easily drop, be careful not to drop.
BEVEL GEAR
2) Further from the position where the ASS'Y CRG has moved up to the deep end, rotate the BEVEL GEAR further more.
3) While rotating the STAR GAER, raise the ASS'Y CRG and remove it.
TE
L 13942296513
4) Rotate the BEVAL GAER in the same way and remove the second ASS'Y CRG.
www
.
http://www.xiaoyu163.com
DRAWER
Fig.5-a
Fig.5-c
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
F ig .5-b
BEVEL GEAR
STAR GEAR
Q Q
3 6 7 1 3 1 5
ASS'Y CRG
Fig.5-d
co
.
-12-
9 4 2 8
BEVEL GEAR
PINION
0 5 8 2 9 9 4 2 8
m
9 9
9 9