Backlight; Battery Power - Honeywell MX8 Reference Manual

Backlight

Start > Settings > System > Backlight
Set the power management timers for the display and keyboard backlights. Set the display brightness for battery and external
power.
IMPORTANT – When the backlight timer expires, the display backlight and the display are OFF, as is the keypad backlight.
This is the System Idle state, there is no separate User Idle state.

Battery Power

Factory Default Settings
Turn of backlight is device not
used for
Timer
Turn on backlight when a button is
pressed or the screen is tapped
When the MX8 is on battery power and the backlight timer expires, the display and the backlights for the display and keypad
are turned off. Default value is 1 minute and both the check boxes are enabled. Adjust the settings and tap ok to save the
changes. The changes take effect immediately.
Enabled
1 min
Enabled
Note:This option is always Enabled,
unchecking this option has no effect.
4-67