Panasonic KX-TVP100E Installation Manual And Instructions For Use page 60

3 Features and Services
2. Call Blocking
The Subscriber can set the VPS to block all incoming calls to his extension.
If this feature is activated, the caller hears:
The caller then hears the Incomplete Call Handling Service menu message.
3. Intercom Paging
By turning on this feature, the VPS permits callers to page a Subscriber over
the Intercom Paging system of the PBX (see Intercom Paging).
If this feature is activated, the caller hears:
Then the VPS pages the Subscriber:
If answered within 20 seconds (default)*, the caller is connected to his intended
extension:
* This time length can be changed by System Programming. See Intercom Paging Parameter
(page 4-71).
If not, the caller hears:
The caller then hears the Incomplete Call Handling service menu message.
Note: You can record the above prompt in other languages. Refer to "Recording
User Prompts" in Chapter 6.
4. Calling a Beeper
If this feature is turned on, the VPS asks the caller to enter his telephone
number for callback and prompts to hang up. The VPS will then call the
Subscriber's beeper and display the callback number on the LCD (see Callback
Number Entry).
Conditions • This feature is available to the Subscriber only.
Subscriber • Setting the Call Transfer Status (Subscriber's Guide page 5-2)
Sorry, no one is available to answer the call.
Please hold while I page your party.
There is a call for <Subscriber's Name>.
Sorry, this pager is not available.
C
Features 3-11