Panasonic KX-TVP100E Installation Manual And Instructions For Use page 132

4.5.1 Setting up Mailboxes
Value Range
Parameter
(default)
1. Telephone
Type
2. Beeper
(Telephone)
Use Device
1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Note: The Subscriber can
telephone.
0–4 times
Number of
Retries
Busy Delay
2–120 min.
No Answer
2–120 min.
Delay
Time frame 1,2
1–12: hour
MON :
00–59: minute
TUE :
AM/PM: a.m./p.m.
WED :
: All Day
THU :
Space: No Use
FRI :
SAT :
SUN :
Device 2, 3
4-24
System Administrator
• Please insert proper number of pauses before
callback number entry code 'X'.
Specifies the device to be notified.
Specifies the usage of Device 1.
1. Not Use
Device 1 is deactivated.
2. Continuously
Device 1 is always active and receives
notification calls whenever a message is
recorded in the mailbox.
3. Scheduled
Device 1 is active during the scheduled
time.
also specify the above three parameters using a
Specifies the number of times that a notification
(0) call to Device 1 should be attempted after a
busy or no answer condition.
Specifies the length of time in minutes the VPS
is to wait after a busy condition before trying to
(3)
make a notification call to Device 1 again.
Specifies the length of time in minutes the VPS
is to wait after a no answer condition before
(30)
trying to make a notification call to Device 1
again.
Specifies a weekly schedule for Message
Waiting Notification.
[Note]
This parameter is valid only when "Use Device"
is set to "Scheduled".
Same as Device 1
Description/Function
Reference
M.W.N.-
Device
p.3-38