Panasonic KX-TVP100E Installation Manual And Instructions For Use page 131

4.5.1 Setting up Mailboxes
Device 1
System Administration Top Menu → 1 → 1 → 1 → Mailbox No. → 2→ Device No. (1–3)
Program – Mailbox Setting – Notification Setting Menu
Value Range
Parameter
Number to Dial Up to 32 digits of
1–9, 0,
P, T, M, X
Device 1 Parameters
Number to Dial ----------------------------------------------------- : 901234567
Type ------------------------------------------------------------------- : Telephone
Use Device ---------------------------------------------------------- : Scheduled
Number of Retries (0-4 times) -------------------------------- : 0
Busy Delay (2-120 min.) ---------------------------------------- : 3
No Answer Delay (2-120 min.) ------------------------------- : 30
Schedule Time frame 1
Day Start Time
MON : 8:00, AM
TUE : 8:00, AM
WED : 8:00, AM
THU : 8:00, AM
FRI :
SAT :
SUN :
: All Day
(default)
Assigns the telephone or beeper number of
, # Device 1.
P : Pause
(None)
T : Dial Tone Detection
M : Dial Mode
X : Callback Number Entry Code
1–9, 0,
[Notes]
• The callback number entry code "X" must
be included in the number to be dialed, if
"Beeper Callback No. Entry Mode" is
activated by COS and "Type" is set to
"Beeper".
• If you took the Quick Setup step to create
mailboxes, each extension number has been
already assigned to this parameter. (Applies
only when your PBX type is T308 or
T616.)
Time frame 2
End Time Start Time
11:00, AM 1:00, PM
11:00, AM 1:00, PM
11:00, AM 1:00, PM
11:00, AM 1:00, PM
Space : No Use
Description/Function
, #: Dial Codes
System Administrator
: . . . . . . . . . . .
End Time
5:00, PM
5:00, PM
5:00, PM
5:00, PM
Reference
Callback
Number
Entry
p.3-7
M.W.N.-
Device
p.3-38
Type
p.4-24
Beeper
Callback
No. Entry
Mode
p.4-33
4-23