Resetting The Leds - IBM pSeries 7311 D10 Service Manual

Resetting the LEDs

After the repair action is completed, do the following:
1. Log in as root user.
2. At the command line, type diag.
3. Select Task Selection.
4. Select Log Repair Action.
5. Select the device that was repaired.
6. Press F10 to exit diagnostics.
If the attention LED remains on after you have completed the repair action and reset the LEDs, call for
service support.
176 Eserver pSeries 7311 Model D10 and Model D20 Service Guide