Flow Control - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Flow Control

On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Figure 109. The Advanced / Flow Control page.
Page 141 of 169
Configuring via Web-based Interface