Local Update - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Local Update

!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
To update the firmware of the router locally, follow the next steps:
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Browse button on the System / Firmware upgrade page to locate the new
firmware file.
3. Click the Update button to upgrade the firmware of the router.
4. Wait until the router is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
6. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
7. Wait until the router is rebooted. Log into the web-based interface, using the default IP
address, login and password (192.168.0.1, admin, admin).
After the upgrade is completed, the new version of the firmware will be displayed in the Firmware
version field in the top left corner of the page.
Page 160 of 169
Configuring via Web-based Interface