Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual
or
PPTP + Static IP
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
L2TP + Static IP Connection
Figure 36. Configuring PPTP + Static IP WAN connection.
Page 47 of 169
Configuring via Web-based Interface