Advanced Settings; Access Control - D-Link Go-RT-N300 User Manual

Section 3 - Configuration
This page allows you to set up an Access Control List to restrict the types of data packets that can enter the network from the Internet.
WAN Setting: Use the drop-down menu to select either WAN or IP address.
IP Address: Enter the IP address range for this rule. This option will only be
available if you have selected IP address above.
Services Allowed: Select the type of Internet service of which packets will be allowed
into the network:
Web - Allows web services from the specified IP address into
the network. You will also be required to enter a port number
for the IP address range (80 by default).
Ping - Allows your network to receive 'ping' requests from the
specified IP address range.
Telnet - Allows telnet services from the specified IP address
into the network. You will also be required to enter a port
number for the IP address range (23 by default).
Click Add to save the rule. Once saved, the new rule will appear in
the Current ACL Table.
To remove a rule, click the Delete button next to the rule you want
to remove.
D-Link GO-RT-N300 User Manual

Advanced Settings

Access Control

IP Address
WAN
29