Dynamic Ip Connection - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Dynamic IP Connection

In the Connection name field, specify a name for the connection for easier identification.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Figure 33. Configuring Dynamic IP WAN connection.
Page 43 of 169
Configuring via Web-based Interface