Routing - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Routing

On the Advanced / Routing page, you can add static routes (routes for networks that are not
connected directly to the device but are available through the interfaces of the device) into the
system.
To create a new route, click the Add button. In the line displayed, you can specify the following
parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Figure 105. The Advanced / Routing page.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be accessed.
The field is displayed when the <Auto> value is selected from the Via
Interface drop-down list.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the router itself sets the interface on the
basis of data on connected networks.
Page 134 of 169
Configuring via Web-based Interface
Description