Firmware Upgrade - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the router and
configure the automatic check for updates of the router's firmware.
!
Upgrade the firmware only when the router is connected to your PC via a wired
connection.
The current version of the router's firmware is displayed in the Firmware version field located
next the D-Link logo in the top left corner of the page.
By default, the automatic check for the router's firmware updates is enabled. If a firmware update is
available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, deselect the
Check for updates automatically checkbox and click the Apply settings button.
To enable the automatic check for firmware updates, in the Remote update section, select the
Check for updates automatically checkbox and click the Apply settings button. By default,
in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is
specified.
You can upgrade the firmware of the router locally (from the hard drive of your PC) or remotely
(from the update server).
Figure 122. The System / Firmware upgrade page.
Page 159 of 169
Configuring via Web-based Interface