Flow Control - D-Link DIR-300 User Manual

DIR-300 Wireless N 150 Home Router
User Manual

Flow Control

On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
To enable the flow control function, select the Enabled checkbox and click the Change button.
To disable the flow control function, deselect the Enabled checkbox and click the Change button.
Figure 110. The Advanced / Flow Control page.
Page 143 of 170
Configuring via Web-based Interface