Troubleshooting - Breville Scraper Pro BEM800XL/B Instruction Book

tRoUBLEShootInG

tRoUBLEShootInG
PoSSIBLE PRoBLEM EASy SoLUtIon
Mixer will not work • Check that the power plug is securely inserted into the wall
outlet.
• Insert the power plug into an independent outlet.
• Insert the power plug into a different outlet.
• Reset the circuit breaker if necessary.
• For additional safety, the Mixer is fitted with a Thermo
Cut-Off. In the event of severe overheating, the Mixer will
automatically shut down to prevent damage to the motor.
Allow more time for the motor to cool before restarting the
Mixer.
Cannot set the time on • Ensure the Speed Control Dial is in the OFF position before
trying to set the count-down timer.
the count-down timer.
Mixer suddenly • The Mixer is equipped with an electronic protection cut-off
which will activate if the motor is stalled or overloaded. This
switches off and E1
is normally a result of excessive ingredients being processed
error message is
at one time. Should the Mixer go into this mode, the LCD
flashing on the LCD
screen will display E1, the LED Speed Indicator will flash
screen
and an alert will sound 3 times.
• Turn the Speed Control Dial to the OFF position and
remove the power plug from the wall outlet. Remove some of
the ingredients from the mixing bowl before restarting the
Mixer.
Mixer suddenly • The Mixer is equipped with a self-resetting safety device
which safeguards against overheating of the motor with
switches off and E2
excessive loads. If overheating occurs, the Mixer will
error message is
automatically activate the overheating protection device
flashing on the LCD
and the motor will switch itself off. Should the Mixer go into
screen
this mode, the LCD screen will display E2, the LED Speed
Indicator will flash and an alert will sound 3 times.
• Turn the Speed Control Dial to the OFF position and remove
the power plug from the wall outlet. Wait at least 15 minutes
before restarting the Mixer.
noise is heard when • When ingredients are in the mixing bowl, the scraper beater
may make a slight noise as it scrapes the sides and bottom
scraper beater is
of the bowl. This is normal and should not cause concern. Do
mixing
not turn the mixer on with the scraper beater in place if the
mixing bowl is empty. This will cause the scraper beater to
make a loud noise as it scrapes the bowl.
35