Advertisement
Troubleshooting
PROBLEM
Mixer will not work when switched ON
Cannot set the time on the count-down timer
Mixer suddenly switches off during mixing
Noise is heard when scraper beater is mixing.
LEM750_ANZ_IB_A20.indd 23
EASY SOLUTION
•
Check the power cord is correctly plugged into the
outlet and the outlet is on.
•
Always ensure the speed control dial is in the
OFF (0) position before starting.
•
Ensure the motor head is locked into a
horizontal position.
•
Ensure the Pause feature has not been engaged.
•
The temperature overload protection (manual reset
cut-out switch ) device has not fully reset; allow more
time for the motor to cool down.
•
Always ensure the speed control dial is in the OFF (0)
position before trying to set the count-down time.
•
The mixer has been stressed by overloading or
stalling. The mixer will automatically activate the
overload protection and the unit will switch off. If this
happens, switch the mixer off at the outlet and unplug
it for at least 30 minutes. The overload protection
device will reset, and the mixer will be ready to use
again when it powers back into standby mode.
•
When ingredients are in the mixing bowl, the scraper
beater may make a slight noise as it scrapes the sides
and bottom of the bowl. This is normal and should
not cause concern. Do not turn the mixer on with the
scraper beater in place if the mixing bowl is empty.
This will cause the scraper beater to make a loud noise
as it scrapes the bowl.
23
5/8/20 12:37 pm
Hide quick links:
Advertisement
