Error Messages - Sony UP-991AD Instructions For Use Manual

Error Messages

Messages appear on the LCD under the following
conditions. Take the remedial actions shown next to the
messages to correct the problem.
Messages Description and remedy
DOOR The paper door is open.
tPress the OPEN/CLOSE button to
EMPTY • There is no paper loaded.
• Paper has been used up.
"COOLING" The protection circuit that prevents the
thermal head from overheating has
been activated.
tWait for the message to disappear.
LOCK When only the BRIGHT dial and
CONTRAST dial are locked;
tKeep pressing the menu lever for
When the menu lever, BRIGHT dial,
and CONTRAST dial is locked;
tIf you want to perform menu
ERROR An internal problem has occurred.
tContact the nearest authorized Sony
NO.INPUT No video signal is input.
tInput a video signal.
PAPE.ERR The UPT-210BL is attached to the
UP-971AD only unit.
tThe UP-971AD cannot use UPT-
NO.SPACE The free space for storing the data in
UP-991AD only the USB Flash Drive is not enough.
tDelete the data of the USB Flash
STOR.ERR The image data writing to the USB
UP-991AD only Flash Drive is failed.
tInsert the USB Flash Drive firmly
44
Error Messages
close the paper door.
tLoad some paper.
Printing will then resume
automatically.
about three seconds and release the
lock, and operate the unit.
operations or use those controls,
contact the nearest authorized
dealer.
dealer.
210BL. Use UPP-210SE or UPP-
210HD printing paper.
Drive in your computer, etc.,
increase the free space. When you
do not use the Sony USB Flash
Drive, change it to the Sony
product.
to the terminal.
Remove the USB Flash Drive, then
insert it again.
Turn the power off, then on again.
When you do not use the Sony USB
Flash Drive, change it to the Sony
product.