Sony UP-991AD Instructions For Use Manual page 29

To cut paper (UP-971AD)
Hold the paper at a position which is 15 to 30 cm away
from the paper exit, then pull it up in the direction the
arrow indicates.
How the paper is cut off varies depending on positions
you hold on the paper, directons in which you pull up the
paper, and speeds at which you pull it up.
Cut off the paper according to the print size.
Paper currently selected
You can confirm the paper currently selected on the
LCD. The type of printing paper used is displayed on the
right of the display when the paper door opens or closes.
UPT-210BL
UPP-210HD
UPP-210SE
Note
If "AUCT:ON" is selected in the "AUT.CUT"
menu, quickly remove the prints that have been cut.
Otherwise, the cut prints may block the paper exit
and cause a paper jam to occur.
If the printout image is blurred
A rapidly moving image may be blurred when printed.
Should this occur, make a printout with "FIED:OFF"
selected in the "VIDEO" "-FIELD" menu item.
Printing two, four or six images on one
sheet
Use "N.MULTI" item of the menu to capture and print
two to six different images on one sheet.
1
In the "VIDEO" "-N.MULTI" menu, display
"MULTI:2" – "MULTI:6" according to the number
of images you want to print on one sheet, then press
the menu lever.
2
When the MULTI PICTURE button on the front
panel is pressed, the LCD display switches to the
multi-picture mode.
When "MULTI:2" is selected:
: 1 indicates that "1" flashes.
3
Press the CAPTURE button in step 3 of "Starting a
Print Job of Video Images" in the section "Analog
mode" (page 28).
This captures the displayed image and assigns it the
flashing number.
The next available number flashes in the LCD
display.
When "MULTI:2" is selected:
: The captured image is assigned "1" and
"2" starts flashing.
4
Press the CAPTURE button again to capture the
displayed image.
If the "AUT.PRT" menu is ON, printing starts
automatically as soon as the number of images
specified by "MULTI:(2/4/6)" is captured. If the
menu is OFF, press the PRINT button to start
printing.
Capturing two images ("MULTI:2 selected in
"N.MULTI")
Image captured
in step 3
Printing direction
Capturing four images ("MULTI:4 selected in
"N.MULTI")
Capturing six images ("MULTI:6 selected in
"N.MULTI")
"INFO:ON" selected in "INFO" menu
In multi-picture mode, if "INFO:ON" is selected in the
"INFO" menu, information about the last captured
image is printed in the margin.
Image captured
in step 4
29
Printing