Sony UP-991AD Instructions For Use Manual page 33

To sharpen the outline
You can adjust the sharpness of the picture outline in the
"ADJUST" – "-SHARP" menu.
Contents Operation/Value
Sharpen the outline Raise the value
Soften the outline Lower the value
To adjust halftone brightness
You can adjust the halftone brightness of printouts in the
"ADJUST" – "-TONE" menu.
Contents Operation/Value
Brighten the halftone Raise the value
Darken the halftone Lower the value
To adjust the picture quality easily
You can select the most suitable value by printing nine
images of differing quality on a single paper.
You cannot print nine different images in the gamma
adjustment.
1
When you want to adjust the printing image of the
video images, connect this unit to a video device.
You do not need print before.
When you want to adjust the printing image of the
digital images, print the image to adjust
beforehand, which is required to print nine different
images.
2
Confirm the displaying "READY" on the LCD, and
press the menu lever.
3
Turn the menu lever up or down to display
"ADJUST."
4
Turn the menu lever to the right to display "-
BRIGHT."
5
Turn the menu lever up or down to display the item
which you want to adjust.
6
Turn the menu lever to the right to display the value.
Blinks the PRINT button.
7
Press the PRINT button.
Prints nine images input from the video device, or
nine images of the digital image you have printed
previously.
Example; When the PRINT button is pressed while
"BRIGHT" is set to "0."
BRIGHT=-16 BRIGHT=-12
BRIGHT=0
BRIGHT=-4
BRIGHT=8 BRIGHT=12
CONTRAST=10 GAMMA=1 SHARP=2 TONE=8
The value changes such as in the following figure. The
center image is the current setting value.
The modification range has 4 increments. (In the
"SHARP" menu, 2 increments.)
Displays the other setting values in the lower left margin
of the printing image.
Setting Value
Other setting values
8
Select the most suitable image confirming the print
result.
Turn the menu lever up or down to display the
setting value.
Press the menu lever to set the value.
The setting value will be reflected in the picture
from the next printing.
For further adjust the value, or other setting values,
turn the menu lever once to the left, and then return
to step 5.
BRIGHT=-8
BRIGHT=4
BRIGHT=16
33
Printing