Sony UP-991AD Instructions For Use Manual page 22

1st layer Explanation
VIDEO Menu for video images
22
Adjustments and Settings Using the Menu
2nd layer Explanation
a)
ASPECT Switches the aspect ratio.
ASPT:1:1: Prints pictures with 1:1 aspect ratio.
[ASPT:4:3]: Normally set this status.
AUT.PRT You can switch between automatic and manual printing in multi-picture mode.
AUTP:ON: Prints pictures without pressing the PRINT button. Printing
starts automatically as soon as the number of images specified in the
multi picture mode is captured.
[AUTP:OFF]: Prints by pressing the PRINT button.
COLOR Switches according to the input signal.
COLR:ON: For printing images from color video signals.
[COLR:OFF]: For printing images from black and white video signals.
Also, switches the file format (color/black and white) for saving to USB Flash
Drive. To save in color, select "CAPT" in "STR.KEY." (UP-991AD only)
FIELD Switches the memory mode.
FIED:ON: When a picture containing rapid motion results in a doubly-
blurred print, select this.
[FIELD:OFF]: Normally select this.
INTRPT Switches the operation when you cancel printing.
Single-picture mode:
INTR:ON: If you press the PRINT button again to cancel a print
operation and want to print a screenshot at the moment the PRINT
button is pressed, select this.
INTR:OFF: Even when you press the PRINT button again during a
print operation, printing continues. If you want to print a screenshot at
the moment the PRINT button is pressed after the print operation
finishes, select this.
Multi picture mode:
INTR:ON: If you press the CAPTURE button again to cancel a print
operation and want to print a screenshot at the moment the CAPTURE
button is pressed, select this. The screenshot is printed at the position
that the number flashing in the LCD display indicates.
INTR:OFF: Even when you press the CAPTURE button again during a
print operation, printing continues.
N.MULTI Specify the number of printed pictures on a paper.
MULTI:6: Six pictures on a paper (divided into six sections)
MULTI:4: Four pictures on a paper (divided into four sections)
[MULTI:2]: Two pictures on a paper (divided into two sections)
SCALE Set the scale of enlargement for printing pictures.
The modification range is [1.0] to 2.0, in 0.1 increments.
b)
SIDE Switches the print direction.
SIDE:ON: Prints pictures sideways.
[SIDE:OFF]: Prints pictures in the way they appear on the monitor screen.
STR.KEY Sets the mode by which to save picture data to a USB Flash Drive.
[STR:PRNT]: Saves pictures to USB Flash Drive by pressing the PRINT
UP-991AD
only button. The picture will be saved after printing.
STR:CAPT: Saves pictures to USB Flash Drive by pressing the
CAPTURE button.
PRT.POS Prints video images with coordinate lines for adjusting the printing area.
START.H Specifies the horizontal starting point of the printing range.
S.H: 0~[6]~719 (NTSC)
0~[8]~719 (PAL)
START.V Specifies the vertical starting point of the printing range.
S.V: 0~[22]~503 (NTSC)
0~[28]~603 (PAL)
END.H Specifies the horizontal ending point of the printing range.
E.H: 0~[719] (NTSC)
0~[707]~719 (PAL)
END.V Specifies the vertical ending point of the printing range.
E.V: 0~[500]~503 (NTSC)
0~[598]~603 (PAL)