Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2006 E 320 CDI Operator's Manual

The memory button and memory position
buttons are located on the door.
M Memory button
1, 2, 3 Memory position button
Switch on the ignition ( page 36).
or
Open the respective door.

Storing positions into memory

Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position ( page 40).
Press memory button M.
Release memory button M and press
memory position button 1, 2 or 3 with-
in 3 seconds.
All the settings are stored to the select-
ed position.
Controls in detail
Memory function

Recalling positions from memory

!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
Press and hold memory position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have completely moved to the stored
positions.
i
Releasing the memory position button
stops movement to the stored posi-
tions immediately.
139