Synchronizing The Panorama Roof With Power Tilt/Sliding Panel - Mercedes-Benz 2006 E 320 CDI Operator's Manual

Controls in detail
Panorama roof with power tilt/sliding panel*
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel must be
synchronized
after the battery has been
disconnected or discharged
after the tilt/sliding panel has been
closed manually ( page 429)
after a malfunction
if the tilt/sliding panel does not open
smoothly
Remove the fuse from the main fuse
box ( page 461).
Reinsert the fuse in the main fuse box.
Switch on the ignition ( page 36).
Move and hold the roof panel switch in
direction of arrow 2 until the roller
sunblinds are fully closed.
Keep holding the roof panel switch in
direction of arrow 2 for approximately
1 second.
242
Move and hold the roof panel switch in
direction of arrow 1 until the roller
sunblinds are fully opened.
Keep holding the roof panel switch in
direction of arrow 1 for approximately
1 second.
Move and hold the roof panel switch in
direction of arrow 3 until the tilt/slid-
ing panel is fully raised.
Keep holding the roof panel switch in
direction of arrow 3 for approximately
1 second.
Move and hold the roof panel switch in
direction of arrow 2 until the tilt/slid-
ing panel is fully closed.
Keep holding the roof panel switch in
direction of arrow 2 for approximately
1 second.
Check the Express-open feature of the
tilt/sliding panel ( page 241).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.