Valet Locking - Mercedes-Benz 2006 E 320 CDI Operator's Manual

Controls in detail
Locking and unlocking
i
If the emergency release button is
pressed and the vehicle was centrally
locked using the SmartKey, the exterior
lamps will flash and the alarm will
sound as the trunk opens.
To cancel the alarm, do one of the
following:
Insert the SmartKey in the starter
switch.
Press button Œ or ‹ on the
SmartKey.
In vehicles with KEYLESS-GO*
Pull an outside door handle.
The SmartKey with KEYLESS-GO
must be within 3 ft (1 m) of the ve-
hicle.
Press the KEYLESS-GO* start/stop
button ( page 37).
The SmartKey with KEYLESS-GO
must be inside the vehicle.
128

Valet locking

i
To deny any unauthorized person ac-
cess to the trunk, e.g. when you valet
park the vehicle, lock it separately with
the mechanical key. Leave only the
SmartKey or SmartKey with
KEYLESS-GO* less its mechanical key
with the vehicle.
1 Neutral position
2 Locked
Close the trunk ( page 122).
Pull the mechanical key out of the
SmartKey ( page 426).
Insert the mechanical key in the trunk
lid lock.
Turn the mechanical key clockwise to
position 2 to lock the trunk.
The trunk remains locked even when the
vehicle is centrally unlocked.
i
You can only cancel the separate trunk
locking mode by means of the
mechanical key.
Insert the mechanical key in the trunk
lid lock.
Turn the mechanical key counterclock-
wise to neutral position 1 to unlock
the trunk.
You can now open the trunk
( page 120).