Mercedes-Benz 2006 E 320 CDI Operator's Manual page 273

Controls in detail
Loading
i
If tall persons have occupied the driv-
er's and front passenger seats, it may
be necessary to move these seats for-
ward slightly in order to fold the rear
seat backrests forward.
Pull release handle 1.
The seat cushion automatically springs
upward slightly.
1 Seat cushion
2 Seat backrest
Grip the back of seat cushion 1 and
fold forward.
272
Push the rear seat head restraints all
the way in.
i
If the rear center seat is to be occupied
while driving, it may be necessary to
fold the seat belt buckle up again.
Pull the handle in the trunk.
The seat backrest is released and the
head restraints fold back.
Fold the seat backrest forward.
!
Make sure the head restraints fit all the
way into the seat cushion pockets. This
will prevent the backrests from being
damaged during loading.
Returning seat backrest to original po-
sition
1 Seat cushion
2 Seat backrest
Swing seat backrest 2 to the rear until
it engages.
Swing seat cushion 1 to the rear and
press the center front of the cushion
until it audibly engages.