Mercedes-Benz 2006 E 320 CDI Operator's Manual page 169

Controls in detail
Control system
Time/Date submenu
Access the Time/Date submenu via the
menu. Use the
Settings Time/Date
menu to change the time and date display
settings. The following functions are avail-
able:
Function
Synchronizing the time
Set time (hours)
Set time (minutes)
Set date (month)
Set date (day)
Set date (year)
i
Information on setting the time, refer to
separate COMAND instructions.
168
Synchronizing the time
This function can only be seen on vehicles
sub- with COMAND and navigation module*.
Move the selection marker with
button æ or ç to the
submenu.
Page
Press button j or k repeatedly
until the message
168
head unit appears in the multifunction
168
display.
169
The selection marker is on the current
169
setting.
169
170
Press button æ or ç to select
the desired setting.
Set time (hours)
This function can only be seen when time
synchronization is switched off.
Move the selection marker with
button æ or ç to the
Time/Date
submenu.
Press button j or k repeatedly
Time sync. with until the message
pears in the multifunction display.
The selection marker is on the hour set-
ting.
Press button æ or ç to set the
hours.
Confirm by pressing reset button
( page 150).
Time/Date
Clock, hours ap-