Display
Display message
BAS
malfunction
Visit workshop
Display defective
Visit workshop
unavailable
See Operator's Manual
Possible cause
The BAS has detected a malfunction and
switched off.
BAS or the BAS display is malfunctioning.
!
The charging voltage has fallen below
10 volts and the BAS has switched off.
The brake system is still functioning nor-
mally but without the BAS available.
Practical hints
What to do if ...?
Possible solution
Continue driving with added caution.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
Continue driving with added caution.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
When the voltage is above this value
again, the BAS is operational again.
Have the system checked at an autho-
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
367