Table of Contents
Advertisement
Checking engine oil level with the
control system
When checking the oil level
the vehicle must be parked on level
ground
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least five minutes with
the engine turned off
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the
multifunction display, do the following:
Switch on the ignition ( page 34).
The standard display ( page 133) should
appear in the multifunction display.
Press buttonk or j on the
steering wheel until the following
message is seen in the multifunction
display:
One of the following messages will
subsequently appear in the indicator:
Engine oil level
ok
Add 1.0 qt.
to reach max. oil level!
(Canada:
)
1.0 liter
Add 1.5 qt.
to reach max. oil level!
(Canada:
1.5 liter
)
Add 2.0 qt.
to reach max. oil level!
(Canada:
2.0 liter
)
Operation
Engine compartment
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
If necessary, add engine oil.
For adding engine oil, see ( page 309).
More information on engine oil can be
found in the "Technical data" section
( page 453) and ( page 455).
307
Advertisement
Table of Contents
