Controls in detail
Soft top
6 Retaining lugs
7 Mounting fixture on right side
8 Catch
Fold retaining lugs 6 out.
Slide pre-assembled wind screen into
mounting fixture on right side 7 using
retaining pin on right side. Simulta-
neously, retaining lugs 6 should slide
into seat belt passage in rear bench
seat.
254
Pull catch 8 back and guide left re-
taining pin into mounting fixture on left
side.
Fold upper section of wind screen up
toward head restraints until it stops.
Warning!
Check for secure locking by pulling up on
the wind screen.
To prevent personal injury, remove wind
screen if rear seats are to be occupied by
passengers.
Removing
Fold upper section of wind screen back
down.
Pull catch 8 back and pull wind
screen out toward front of vehicle. Be
careful not to damage interior trim with
G
guide tabs.
Fold retaining lugs 6 back.
9 Catch
Press catch 9 and fold upper and low-
er sections back.
Place the wind screen back into the
bag.