Settings Menu - Mercedes-Benz 2005 CLK-Class Cabriolet Operator's Manual

Controls in detail
Control system
Press button k or j.
The stored messages will now be
displayed in the order in which they
have occurred. For malfunction and
warning messages, see "Vehicle status
messages in the multifunction display"
( page 363).
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch. With
KEYLESS-GO*, turn off the engine by
pressing the KEYLESS-GO* start/stop
button and open the driver's door.
i
The vehicle status message memory
will be cleared when you switch on the
ignition. You will then only see high-pri-
ority messages in the multifunction dis-
play ( page 363).
142

Settings menu

In the Settings menu there are two
functions:
The function
Reset to factory
, with which you can reset all
settings?
the settings to the original factory
settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the menu appears in the
Settings
multifunction display.
Resetting all settings
You can reset all the functions of all
submenus to the factory settings.
Press the reset button in the
instrument cluster ( page 130) for
approximately three seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
Press the reset button once more.
The functions of all the submenus will
reset to factory settings.