Table of Contents
Advertisement
!
If the upward movement of a door win-
dow is blocked during the closing pro-
cedure, the door window will stop and
open slightly.
Remove the obstruction, pull the
switch again past the resistance point
and release.
If the door window still does not close
when there is no obstruction, then pull
the switch and hold it. The door window
will then close without the obstruction
sensor function.
Warning!
Driver's door only:
If within five seconds you again pull the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
Stopping windows
Press or pull respective switch again.
Opening and closing the windows with
the soft top switch
The soft top switch is located in the center
console.
G
1 Soft top switch
In addition to the power window switches,
the windows can also be opened or closed
with the soft top switch 1.
Controls in detail
Power windows
Warning!
Never operate the windows if there is the
possibility of anyone being harmed by the
opening or closing procedure.
In case the procedure causes potential dan-
ger, the procedure can be immediately halt-
ed by releasing the soft top switch. To open
the windows again, press the soft top switch
twice. Press the switch briefly the first time.
Then press the switch a second time and
hold it until the side windows have reached
the desired position.
Switch on the ignition.
G
241
Advertisement
Table of Contents
