Table of Contents
Advertisement
Cleaning the Parktronic system*
sensors
1 Parktronic system* sensors
Clean the sensors 1 on the bumpers
using a mild car wash detergent, such
as Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratchy cloth.
When using a steam cleaner or power
washer, aim nozzle only briefly from a min-
imum distance of 12 in (30 cm) at
sensors 1.
Do not apply strong pressure to the sensor
cover, applying strong pressure may dam-
age the sensor cover.
To prevent scratches, never apply strong
force and only use a soft, non-scratchy
cloth when cleaning the sensor. Do not at-
tempt to wipe dirty sensors with a dry cloth
or sponge.
Operation
Vehicle care
Wiper blades
Fold wiper arm forward until it snapes
into place.
Warning!
For safety reasons, switch off wipers and
remove SmartKey from starter switch
(vehicles with KEYLESS-GO*: make sure the
vehicle's on-board electronics have status
0
) before cleaning the wiper blades.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
Clean the wiper blade inserts with a
clean cloth and detergent solution.
!
Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold onto the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
G
349
Advertisement
Table of Contents
