Parts Identifications - Sony RMU-01 Operating Instructions Manual

Parts
Identifications
Front side
Bottom side
a Antenna storage section
b Hole for attaching the microphone
stand
Can be attached to the microphone stand
1
(PF / -inch thread) with this hole.
2
5
To attach an NS /
microphone stand, use the supplied screw
adapter.
c AC adapter connector and POWER
indicator
Connect the supplied AC adapter to the AC
adapter connector to supply power to this
unit.
The POWER indicator lights up green
while the power is supplied from the AC
power connector or the LAN connector.
4

Parts Identifications

3
-inch or a W / -inch
8 8
For details on power supply to this unit, see
"Connecting to Power Supply and Other Devices"
on page 19.
d LAN connector (RJ-45)
This is a 10Base-T/100Base-TX connector
for network connection. Communication
speed automatically changes according to
the connected device.
Connect to a receiver such as DWR-R01D,
Windows PC, or hub.
When a PoE device including PoE hub is
connected, the power is supplied through
this connector.
CAUTION
• For safety, do not connect the connector
for peripheral device wiring that might
have excessive voltage to this port.
Follow the instructions for this port.
• Do not touch the LAN connector directly
with your hand. If you do, electrostatic
discharge may damage the internal
components.