Preparations Of Operation; Using The Rmu-01 Setting Tool - Sony RMU-01 Operating Instructions Manual

Preparations of
Operation
Do the procedure below to prepare the
operation in NT remote system.
1
Install the RMU-01 Setting Tool
software on the PC.
For details on installing procedure, refer to
the printed Operating Instructions.
2
Connect this unit to the PC with the
RMU-01 Setting Tool installed with a
LAN cable.
At this point, the connection to the
DWR-R01D is unnecessary.
3
Set the IP address of this unit by using
the RMU-01 Setting Tool software.
For details, see "Using the RMU-01 Setting
Tool" on page 11.
4
Connect the PoE hub or PoE power
supply unit and the DWR-R01D, etc.,
to this unit.
For details on the power supply to the unit, see
"Connecting to Power Supply and Other
Devices" on page 19.
For details on system configuration examples,
refer to the Operating Instructions supplied
with the DWR-R01D.
Using the RMU-01
Setting Tool
Note
Depending on the PC environment, an
attempt to start up the RMU-01 Setting
Tool software may be blocked by the
firewall. When the firewall is activated for
the RMU-01 Setting Tool software, LAN
communication necessary for the NT
remote function is blocked, resulting in the
operational failure of this unit. To prevent
this from happening, set the firewall so that
the RMU-01 Setting Tool software is
unblocked.
This section explains the use of the Setting
Tool software supplied with the RMU-01
Remote Control Unit.
Notations Used in This User's
Guide
• Clicking a menu or button and then
selecting a sub-menu is expressed as
follows: Select "Menu (or button) > (sub-
menu name)".
Example: Select "File menu>New".
• Holding down one key on the keyboard
while pressing another is indicated by a
"+" sign between the two keys.
Example: Press Ctrl + C.
About the Window Displays
The window displays that appear in this
section may differ from those on your PC,
due to differences in the operating system
being used.
Preparations of Operation / Using the RMU-01 Setting Tool 11