Attaching On The Wall - Sony RMU-01 Operating Instructions Manual

Cable holder
(supplied)

Attaching on the Wall

Note
Do not touch the LAN connector directly
with your hand. If you do, electrostatic
discharge may damage the internal
components. To prevent this unit from
electrostatic damage, grounding the
supplied brackets, safety wire, etc., by
attaching them to metallic object is
recommended.
1
Attach the bracket A on the wall
securely with screws.
Bracket A (supplied)
2
Attach the bracket B and the cable
holder to this unit.
Bracket B
(supplied)
Cable holder
(supplied)
Screws (supplied)
3
Make connections and bring the cables
together with the cable holder.
For details on connections, see "Connecting
to Power Supply and Other Devices" on
page 19.
4
Wrap the supplied safety wire around
the bracket B.
Safety wire (supplied)
5
Join the brackets by pressing down the
two hooks on the bracket B against
the two square holes on the bracket A,
Rear side of
this unit
Installations 9