until the upper edges of the brackets
align.
Note
Take care not to catch the cables
between the brackets.
Bracket A (supplied)
6
Fix the end of the safety wire to the
wall with a screw.
Safety wire (supplied)
7
Screw in the supplied screw adapter
into the hole for attaching the
microphone stand to secure the bracket
A to this unit.
10
Installations
Bracket B
(supplied)
Screw adapter
(supplied)
Attaching to the Catwalk,
Pole, or a Lighting Battens
1
Attach the bracket A to the location
where this unit is attached by using
banding bands.
2
Do steps 2 to 7 in "Attaching on the
Wall" on page 9.
Bracket A
(supplied)