Sony RMU-01 Operating Instructions Manual page 6

1) Radius: approx. 10 m (33 feet)
2) Front side (the side with SONY logo)
Emitted radiowave is strong in the area
inside the radius of approximately 10 m
(33 feet). When installing multiple RMU-
01 units, place them so that strong signal
area touches that of adjacent RMU-01 unit.
Installation example 1 (plane view)
When two RMU-01 units are installed to
control the body-pack transmitter that is
worn around the waist of a person, it is
recommended that the RMU-01 units be
placed across the body-pack transmitter so
that there is no obstacle between the
transmitter and at least one of the RMU-01
units.
6 Making Use of the NT Remote Function
Antenna (inside
the casing)
1) RMU-01
2) Transmitter worn around the waist of a
person
Installation example 2 (plane view)
To increase the total operation area by
putting the areas that multiple RMU-01
units cover together, place them so that the
area that one RMU-01 covers touches those
on others, completely adjacent and with no
gaps.
1) RMU-01
2) Transmitter
Installation example 3 (section
view)
This is an example when this unit is
installed to the microphone stand.